Holman Misting Tap Timer
Episode: 1
Title: Holman Misting Tap Timer
Broadcast: 5th September 2015
Presenter: Nigel Ruck
With the ever increasing popularity of vertical and container gardens for balconies, courtyards and rooftops, Holman Industries invented a specialized tap timer that was released last November, originally designed to go with their misting kit and it works really well in greenhouses.
- The timer uses low energy, less than 20 micro amps in stand by mode that ensures long battery life.
- Easy programming using 6 buttons and a large LCD display.
- Installation of the timer is easy as the timer fits either a 20mm and 25mm thread. Once it’s on, no more screwing is required because it has a quick release clip which is a good thing as it is easy to damage the thread when screwing plastic to metal so take care. Make sure the filter is in place, line it up, slowly turn and then tighten.
- It also has a low battery auto lock out to ensure that the timer cannot open unless it can close.
- Electronic battery monitoring that provides constant reading of battery strength.
- The timer lets you choose multiple start times and fine tune the watering duration from hours and minutes and even down to seconds.
- It also has multiple starts with a delay function as well as with “On” and “Off” times.
- To save your time and water, pick up one of these Holman Misting Tap Timer at your local hardware store.
Holman Misting Tap Timer: Contact – 08 9204 1011
Website - http://www.holmanindustries.com.au/products/misting-tap-timer-co3009/